Product added to cart
Authentic Crown 3 Sub-Ohm Tank by Crown
As low as $27.99
Out of stock
Uwell returns in 2017 with the Crown 3, an evolutionary update to one of the most beloved Sub-Ohm Tank platforms in the history of our industry presenting a 24.5mm diameter chassis with a 5 milliliter max capacity and the new Crown III Parallel Coil Design. The Crown 3 measures 24.5mm in diameter and features sleek and smart design elements that combine for a universally appealing design. The Crown 3 features an Anti Leak Threaded Top Fill Method that unscrews to reveal dual 3.5mm by 6mm fill ports. The Crown 3 utilizes the new Crown 3 Plug and PullReplacement Coil Family, with a threadless design that features reinforced seals to provide a liquid tight fit and finish. Each coil features a vertical coil arrangement and triple vertical wicking slots for rapid wicking. Three 11mm by 2mm triple adjustable bottom airflow makes for smooth and effective airflow, and can be fully closed to seal the system effectively. The Uwell Crown 3 Sub-Ohm Tank is an excellent midwattage tank with superior construction, a convenient Plug and Pull coil system, and ergonomic designs throughout.
Please note, the Stainless version features a randomly selected colored drip tip and cannot be changed. The Iridescent version features a purple drip tip; the Sapphire Blue version features a sapphire blue drip tip; the Purple version features a purple drip tip; the Black version features a red drip tip and the Matte Black version features a dark green drip tip.
Features and Specs:
- 24.5mm Diameter Base
- 5.0ml Max Capacity
- Anti Leak Threaded Top Fill Method
- 3.5mm by 6mm Dual Fill Ports
- Crown 3 Plug and Pull Replacement Mechanism
- 0.25 ohm SUS316 Parallel Coil
- 80 to 90W
- 0.5 ohm SUS316 Parallel Coil
- 70 to 80W
- Vertical Coil Design
- Plug and Pull Design
- Treadless Design
- Convenient and Fast Coil Installation and Replacement
- Crown 3 Key Tool
- Coil Changing and Tank Cleaning
- Precision Triple Adjustable Bottom Airflow
- 11mm by 2mm Each
- Stainless Steel Construction
- Available in Other Finishes
- Quartz Glass
- Stainless Steel 510 Threading
- 24K Gold Plated Contact
- One Uwell Crown 3 Sub-Ohm Tank
- One 0.25 ohm SUS316 Parallel Coil
- 80 to 90W
- One 0.5 ohm SUS316 Parallel Coil
- 70 to 80W
- One Replacement Glass Tank Section
- Spare Parts Pack
- User Manual
Tip for new users: We strongly suggest 6mg eLiquid or lower with this atomizer. Sub-ohm atomizers produce higher throat hit than low and standard resistance atomizers. Using this atomizer with a nicotine level above 6mg will usually taste burnt or harsh.
Warning: This tank uses sub-ohm resistance coils. This tank should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must be also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.
Please Note: This product is not covered by warranty and cannot be exchanged.
Vapeshack.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.